dmesg - prop drivers
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-36-generic (buildd@lcy01-27) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #42~14.04.1-Ubuntu SMP Fri May 13 17:27:22 UTC 2016 (Ubuntu 4.2.0-36.42~14.04.1-generic 4.2.8-ckt8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 007f000000
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007b665fff] usable
BIOS-e820: [mem 0x000000007b666000-0x000000007b695fff] reserved
BIOS-e820: [mem 0x000000007b696000-0x000000007b952fff] usable
BIOS-e820: [mem 0x000000007b953000-0x000000007ba10fff] ACPI NVS
BIOS-e820: [mem 0x000000007ba11000-0x000000007d9fcfff] reserved
BIOS-e820: [mem 0x000000007d9fd000-0x000000007d9fdfff] usable
BIOS-e820: [mem 0x000000007d9fe000-0x000000007dc03fff] ACPI NVS
BIOS-e820: [mem 0x000000007dc04000-0x000000007dd5afff] usable
BIOS-e820: [mem 0x000000007dd5b000-0x000000007e947fff] reserved
BIOS-e820: [mem 0x000000007e948000-0x000000007e97ffff] usable
BIOS-e820: [mem 0x000000007e980000-0x000000007eff0fff] reserved
BIOS-e820: [mem 0x000000007eff1000-0x000000007effffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X-ITX+, BIOS P3.40 01/14/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
BRK [0x01ff6000, 0x01ff6fff] PGTABLE
BRK [0x01ff7000, 0x01ff7fff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01ff8000, 0x01ff8fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23edfffff]
[mem 0x220000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7b665fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7b5fffff] page 2M
[mem 0x7b600000-0x7b665fff] page 4k
init_memory_mapping: [mem 0x7b696000-0x7b952fff]
[mem 0x7b696000-0x7b952fff] page 4k
BRK [0x01ff9000, 0x01ff9fff] PGTABLE
init_memory_mapping: [mem 0x7d9fd000-0x7d9fdfff]
[mem 0x7d9fd000-0x7d9fdfff] page 4k
BRK [0x01ffa000, 0x01ffafff] PGTABLE
init_memory_mapping: [mem 0x7dc04000-0x7dd5afff]
[mem 0x7dc04000-0x7dd5afff] page 4k
init_memory_mapping: [mem 0x7e948000-0x7e97ffff]
[mem 0x7e948000-0x7e97ffff] page 4k
init_memory_mapping: [mem 0x7eff1000-0x7effffff]
[mem 0x7eff1000-0x7effffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35800000-0x36bf7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007B9D7088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007B9DD450 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
ACPI: DSDT 0x000000007B9D71A8 0062A7 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000007BA07F80 000040
ACPI: APIC 0x000000007B9DD560 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007B9DD5E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007B9DD628 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007B9DD6C8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000007B9DD708 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: AAFT 0x000000007B9DD740 0002DC (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: UEFI 0x000000007B9DDA20 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: SSDT 0x000000007B9DDA68 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000007B9DE608 000346 (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x000000007B9DE950 0005A0 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000007B9DEEF0 0016E4 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x000000007B9E05D8 001519 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff6000-0x23effafff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000007b665fff]
node 0: [mem 0x000000007b696000-0x000000007b952fff]
node 0: [mem 0x000000007d9fd000-0x000000007d9fdfff]
node 0: [mem 0x000000007dc04000-0x000000007dd5afff]
node 0: [mem 0x000000007e948000-0x000000007e97ffff]
node 0: [mem 0x000000007eff1000-0x000000007effffff]
node 0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 1813087
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7852 pages used for memmap
DMA32 zone: 502466 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7b666000-0x7b695fff]
PM: Registered nosave memory: [mem 0x7b953000-0x7ba10fff]
PM: Registered nosave memory: [mem 0x7ba11000-0x7d9fcfff]
PM: Registered nosave memory: [mem 0x7d9fe000-0x7dc03fff]
PM: Registered nosave memory: [mem 0x7dd5b000-0x7e947fff]
PM: Registered nosave memory: [mem 0x7e980000-0x7eff0fff]
PM: Registered nosave memory: [mem 0x7f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023ec00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1784734
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7033892K/7252348K available (7969K kernel code, 1244K rwdata, 3816K rodata, 1472K init, 1292K bss, 218456K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3693.408 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.81 BogoMIPS (lpj=14773632)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea9000 - ffffffff81eb0000)
ftrace: allocating 30999 entries in 122 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G (fam: 15, model: 30, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (29547.26 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7b953000-0x7ba10fff] (778240 bytes)
PM: Registering ACPI NVS region [mem 0x7d9fe000-0x7dc03fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:17:44, date: 05/25/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:130f] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
pci 0000:03:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe93ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7b666000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b953000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7d9fe000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7dd5b000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e980000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] could not be reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:02: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20448K (ffff880035800000 - ffff880036bf8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x77666000-0x7b666000] (64MB) mapped at [ffff880077666000-ffff88007b665fff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1464211064.848:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-36-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-36-generic ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.2.0-36-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.2.0-36-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:13.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.2.0-36-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:14.5
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 88c2a3e9923be7846a02954d3dcfd246b2c2079a'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:820:298
rtc_cmos 00:05: setting system clock to 2016-05-25 21:17:45 UTC (1464211065)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1472K (ffffffff81d39000 - ffffffff81ea9000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
systemd-udevd[119]: starting version 204
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 36
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 36
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 36
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 36
scsi host4: pata_atiixp
scsi host5: pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:0c:f1:43]
ata5.00: ATA-8: ST1000DM003-9YN162, CC62, max UDMA/100
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: limited to UDMA/33 due to 40-wire cable
ata5.00: configured for UDMA/33
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 8-2: new full-speed USB device number 2 using ohci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 8-2: New USB device found, idVendor=046d, idProduct=c52b
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: USB Receiver
usb 8-2: Manufacturer: Logitech
ata3.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 1A11 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hidraw: raw HID events driver (C) Jiri Kosina
scsi 4:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC62 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg2 type 0
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sdc: sdc1 sdc2 < sdc5 sdc6 >
sd 4:0:0:0: [sdc] Attached SCSI disk
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input2
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3693.509 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7ac337df0, max_idle_ns: 881590687154 ns
usb 8-3: new full-speed USB device number 3 using ohci-pci
raid6: sse2x1 gen() 7487 MB/s
raid6: sse2x1 xor() 5228 MB/s
usb 8-3: New USB device found, idVendor=046d, idProduct=c52f
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-3: Product: USB Receiver
usb 8-3: Manufacturer: Logitech
raid6: sse2x2 gen() 10898 MB/s
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb8/8-3/8-3:1.0/0003:046D:C52F.0005/input/input5
hid-generic 0003:046D:C52F.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb8/8-3/8-3:1.1/0003:046D:C52F.0006/input/input6
raid6: sse2x2 xor() 7367 MB/s
hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
raid6: sse2x4 gen() 8662 MB/s
raid6: sse2x4 xor() 5897 MB/s
raid6: using algorithm sse2x2 gen() 10898 MB/s
raid6: .... xor() 7367 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 11888.000 MB/sec
Btrfs loaded
usb 8-5: new full-speed USB device number 4 using ohci-pci
BTRFS: device fsid 44f2b333-96c2-42ff-8ec2-ceab2e41fc4c devid 1 transid 183 /dev/sda1
BTRFS: device fsid 5ba142f3-9cb0-4ded-b522-09cbcc468947 devid 1 transid 47778 /dev/sdc6
BTRFS info (device sda1): disk space caching is enabled
usb 8-5: string descriptor 0 read error: -22
usb 8-5: New USB device found, idVendor=13d3, idProduct=3393
usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
random: nonblocking pool is initialized
clocksource: Switched to clocksource tsc
init: plymouth-upstart-bridge main process (225) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (237) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (239) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (240) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (244) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (245) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (247) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (248) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (250) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (251) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (253) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 11905020k swap on /dev/sda5. Priority:-1 extents:1 across:11905020k FS
Adding 5858300k swap on /dev/sdc5. Priority:-2 extents:1 across:5858300k FS
systemd-udevd[358]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
BTRFS info (device sda1): disk space caching is enabled
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 6676 MBytes.
[fglrx] vendor: 1002 device: 130f revision: 0 count: 1
[fglrx] ioport: bar 4, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep 8 2015] with 1 minors
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
input: Logitech K800 as /devices/pci0000:00/0000:00:13.0/usb8/8-2/8-2:1.2/0003:046D:C52B.0003/0003:046D:2010.0004/input/input8
logitech-hidpp-device 0003:046D:2010.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:13.0-2:1
audit: type=1400 audit(1464211070.141:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=549 comm="apparmor_parser"
audit: type=1400 audit(1464211070.141:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001a00000, irq=40
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: failsafe main process (595) killed by TERM signal
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit_printk_skb: 9 callbacks suppressed
audit: type=1400 audit(1464211070.821:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1464211070.821:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1464211070.821:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=745 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (748) killed by HUP signal
init: cups main process ended, respawning
audit: type=1400 audit(1464211071.425:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1464211071.425:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1464211071.425:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1464211071.425:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1464211071.425:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1464211071.425:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1464211071.461:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=835 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:03:00.0 eth0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx] Firegl kernel thread PID: 1353
[fglrx] Firegl kernel thread PID: 1354
[fglrx] Firegl kernel thread PID: 1355
[fglrx] IRQ 42 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f9b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f9b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:ff00000, size:100000
[fglrx] Reserved FB block: Unshared offset:3ffd7000, size:29000
[fglrx] ATIF platform detected with notification ID: 0x81
show_signal_msg: 132 callbacks suppressed
compiz[1762]: segfault at 0 ip (null) sp 00007fff58c45bf8 error 14 in compiz[400000+3000]
[fglrx] ATIF platform detected with notification ID: 0x81
audit: type=1400 audit(1464211101.823:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2800 comm="apparmor_parser"
audit: type=1400 audit(1464211101.823:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2800 comm="apparmor_parser"
audit: type=1400 audit(1464211101.823:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2800 comm="apparmor_parser"
systemd-hostnamed[3011]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[9495]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[2296]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
smallptGPU[3733]: segfault at 1494 ip 00007ff1332d8034 sp 00007fffba32d998 error 4 in fglrx_dri.so[7ff1311dd000+250a000]
smallptGPU[3741]: segfault at 7f458c35b494 ip 00007f45877c8034 sp 00007ffc0b074468 error 4 in fglrx_dri.so[7f45856cd000+250a000]
smallptGPU[3749]: segfault at 7fec7861b494 ip 00007fec737c8034 sp 00007ffeef6707e8 error 4 in fglrx_dri.so[7fec716cd000+250a000]
smallptGPU[3757]: segfault at 1497 ip 00007f03e1a20034 sp 00007ffd1c5acd18 error 4 in fglrx_dri.so[7f03df925000+250a000]
smallptGPU[3765]: segfault at 7f0531ea6c30 ip 00007fb9b37c59cd sp 00007ffd0b28bf08 error 4 in fglrx_dri.so[7fb9b16cd000+250a000]
smallptGPU[3773]: segfault at 7efdd029b494 ip 00007efdcb7c8034 sp 00007ffe7961aee8 error 4 in fglrx_dri.so[7efdc96cd000+250a000]
smallptGPU[3781]: segfault at 7f5a5c3c3494 ip 00007f5a568f8034 sp 00007ffe4e54c838 error 4 in fglrx_dri.so[7f5a547fd000+250a000]
smallptGPU[3789]: segfault at 7ffb35243494 ip 00007ffb2f7c8034 sp 00007ffd95acdd88 error 4 in fglrx_dri.so[7ffb2d6cd000+250a000]
smallptGPU[3801]: segfault at 7f9e9c5fb494 ip 00007f9e977c8034 sp 00007ffe06376258 error 4 in fglrx_dri.so[7f9e956cd000+250a000]